The wood gasifying boilers ATTACK DPX product line 6000 in the versions Standard, Profi and Lambda are intended for economical and ecological heating of dwelling houses, cottages, small plants, work rooms and similar objects. Prescribed fuel for DPX boilers is dry wood. At full utilization of the hopper there is possibility of the continual burning for 8-12 hours.
The new boiler line ATTACK DPX is equipped with the more efficient tubular exchanger flue gas – water. Special movable turbulators installed inside the exchanger serve to brake and to make the turbulent flow of the flue gas through the exchanger. Thereby it comes to higher heat transfer through the steel exchanger wall into the heating water.
From technical view it is a boiler line with high efficiency, low flue gas temperature and more effective combustion process. Achieved efficiency of the ATTACK DPX boiler is up to 91 %. By installation of more efficient boiler of the ATTACK DPX line it comes to significant decrease of the operating costs, projected into the fuel savings, in comparison with less efficient boilers that combust same fuel.
From the social-wide view, it is an enviroment-friendly source, combusting wooden biomass, which is a kind of CO2-neutral fuel. Considering the harmful emissions, the average concentration of CO value in the flue gas, is during operation of the LAMBDA version under the level of 200 mg/m3 related to 10 % of O2. Under the valid European norm EN303-5, classifying the solid fuel boilers by efficiency and emissions to individual classes, the ATTACK DPX boiler (version LAMBDA) reaches 25 times lower concentration of harmful CO emisions in the flue gas incomparison with the allowed level of this norm!
The easiest way of regulation for efficient applications. The management lies in the management of the boiler temperature using the boiler thermostat, and turning off the fan after burning out of fuel, by flue gas thermostat. This regulator is recommended everywhere, where objects are not regularly heated such as cottages and the like. A suitable solution for simpler systems in terms of regulation in connection with accumulation tanks. A good option is with use of upgrade regulator ATTACK Regumax, where most of the control takes over the controller and from the boiler is only required the simplest version of control.
The ATTACK PROFI of the „PID“ generation is a kind of the advanced regulator, which enables to modulate the heat output in the ATTACK® wood gasifying boilers by regulation of the fan rotations. The well-readable display shows the necessary information and makes the boiler control easier.
The ATTACK DPX PROFI boiler brings the improvement of the PID regulation to control the fan rotations according to the temperature of water and flue gas and thereby to achieve the optimal efficiency. The regulator uses the advanced Fuzzy logic system for control to regulate the wood gasification system in the optimal way – to ensure the lowest heat loss possible.
The boiler equipped with the regulator ATTACK PROFI „PID” can control the heating system equipped with the following items: a pump for charging the accumulation tank, accumulation tank, circuit pump of heating circuits and room thermostat, by the lowest loss of heat energy possible. The regulator can be connected and set in the way enabling to control the pump of heating circuits and pump to charge the tank for domestic hot water.
The wood gasifying boiler ATTACK DPX Lambda disposes with the most advanced technology of the combustion process control to achieve the excellent values of emissions and efficiency. Controller can individually regulate amount of the primary and the secondary air, adequately to data about oxygene content from Lambda probe, boiler temperature and flue gas temperature. All the operation parameters are displayed on the well-readable multiline LCD display. The parameters can be change via buttons placed on the control panel of the boiler. Eventual error or warning messages are signalized by flickering LED diodes.
After the fuel burn-out is the boiler automatically stopped according to the flue gas temperature or the oxygene content in the flue gas. All modifications of the ATTACK DPX boilers can be equipped with an additional regulator which ensures control of the accumulation tank, solar panels or other sources of heat energy in different designs of the heating systems, according to the customer´s demands.
Properties – regulation STANDARD
- suitable for simple applications
Properties – regulation PROFI
- improved electronics with be fluent PID regulation of fan rotations
on the basis of the temperature of flue gas
- Fuzzy logic – adjust the working cycle of the combustion of the
wood in ideal conditions
- high efficiency of the boiler and stable burning
- management options including a pump for charging the accumulation
tank, the pump charging domestic hot water
- the possibility of management of circulating pump by thermostat
- clear screen showing the operation of the individual elements
Properties – regulation LAMBDA
- perfect control of the combustion process by the lambda probe
- fluent performance regulation and gas temperature
- rapid initiation of burning, the long time of keeping hot coal for
the next initiation of the burning
- protection against the draining of the accumulation tank
|Nominal output (STANDARD version)||kW||15||25||30||35||40||45||80||100|
|Output range (PROFI, LAMBDA version)||kW||7,5 – 15||12,5 – 25||15 – 30||17,5 – 35||20 – 40||22,5 – 45||32 – 80||40 – 100|
|Heat exchange area||m2||1,98||2,52||2,78||2,78||3,03||3,03||5,6||5,6|
|Volume of feeding chamber||dm3||82||125||158||158||190||190||440||440|
|Dimension of feeding door||mm||235×445||235×445||235×445||235×445||235×445||235×445||292×542||292×542|
|Prescribed chimney draught||Pa||23||35|
|Max. operating overpressure of water||kPa||250|
|Pressure loss on the water side (ΔT 10 K)||kPa||1,9||2,3||4,4||4,4||6,6||6,6||2,1||2,1|
|Pressure loss on the water side (ΔT 20 K)||kPa||0,6||0,7||1||1||1,8||1,8||0,55||0,55|
|Diameter of flue gas connection||mm||150||200|
|Boiler height „A“||mm||1240||1575|
|Boiler width „B“||mm||700||915|
|Boiler depth „C“||mm||840||1240||1340||1340||1440||1440||1890||1890|
|Length of feeding chamber „D“||mm||400||590||690||690||790||790||1100||1100|
|Grade of protection||IP||21|
|Boiler class by CO (under the norm EN 303-5)||–||5|
|Flue gas temperature by nominal output||°C||160||165||170||180||170||180||204||205|
|Flue gas flow by nominal output||kg/s||0,014||0,018||0,02||0,022||0,025||0,028||0,045||0,05|
|Max. noise level||dB||65|
|Fuel type||–||Wood logs with heat value of 15–17 MJ/kg, relative humidity min. 12 % – max. 20 %, ∅ 80–150 mm|
|Average fuel consumption||kg/h||3,9||6,5||7,8||9,1||10,4||11,75||21,5||26,8|
|Approximate wood consumption per season||–||1 kW = 0,9 m3|
|Max. length of wood logs||mm||350||550||650||650||750||750||1000||1000|
|Combustion time at nominal output||hod||3|
|Volume of water in the boiler||l||80||100||110||110||128||128||250||250|
|Recommended volume of the accumulation tank||l||800 – 1500||1000 – 2500|
|Connection voltage||V / Hz||~230/50|
|Range to set the heating water temperature||°C||65–90|
Documents to download
Manual for ignition and cleaning of wood-gasifying boiler ATTACK DPX
Boiler connection to the chimney