+421 43 4003 115
Pellet boiler
Comfort of the pellet boiler
Automatic operation of the boiler controlled by a room thermostat for high comfort of operation. It offers night attenuation, control of the backup boiler, autodiagnostic and control of 4 mixing circuits. The boiler also has the heating control of the DHW storage tank with automatic, regular disinfection (removal of the bacterial legionella flora) and the possibility to add equithermal regulation.
Fully automatic combustion process
Automatic fuel supply
The pellet boiler selects the fuel supply, determines the appropriate power output and air supply. The pellets are filled with a screw feeder (1,5 – 2,5 m) directly into the combustion chamber, where they are burned with a high efficiency of 91%. The whole process of combustion of fuel is precisely controlled: supply of pellets, electric ignition, start of combustion, combustion, shutdown. It is not necessary to monitor the state of combustion. A fully automatic stainless steel Pellet burner with an output of 8 – 30 kW will take care of all this. Just set the required parameters for heating and domestic hot water. It selects the fuel supply, determines the appropriate output control and air supply.
Fuel supply from pellet tank
Automatic boiler cleaning
The pellet boiler Pellet 30 Automatic Plus saves time even when cleaning. The automatic cleaning system is equipped with turbulators which ensure the cleanliness of the tube heat exchanger. The Pellet burner also has automatic cleaning every time it burns out or a certain cycle. The removed ash is automatically removed to the container. It can be easily emptied and the boiler can continue to operate.
Demonstration of the process of burning and cleaning in a pellet boiler
Technical information of important parts of the boiler that may be of interest to you.
Control electronics
Fully graphical 4,5 "touch screen. It allows expansion by an internet module * through which the boiler can be connected to WIFI or LAN.
Service door
They are used to clean the combustion chamber of the exchanger.
Manometer
Indicates system pressure.
Riser pipe
Heating system connection.
Reverse
Heating system connection.
Ash screw conveyor
It is used to move the ash from the combustion chamber to the box.
Ash box
It serves as an ashtray.
Automatic burner
Pellet burner ATTACK Pellet Burner Automatic offers comfort not only when burning fuel but also setting and control. Pellets are automatically drawn from the fuel feeder which fall into the burner on the grate where they ignite with electric ignition and the combustion itself begins.
Refractory concrete fitting
They serve to direct the flow of flue gases and burn up harmful emissions.
Pellet feeder motor
It is used to control the movement of the pellet feeder.
Turbulator drive motor
It is used to control the movement of turbulators which clean the tube heat exchanger.
Turbulators
The boiler is equipped with a high-efficiency tube heat exchanger with turbulators which contribute to the high efficiency of the boiler and reaches a value of up to 91%.
Chimney flange
They are used to clean the combustion chamber of the exchanger.
SMART Boiler control
The ATTACK PELLET 30 AUTOMATIC Plus pellet combustion boiler is controlled by a clear, fully graphics 4.5” touch screen on the upper covering plate of the boiler. The new control allows to expand with an internet module * through which the boiler can be connected to WIFI or LAN and controlled using a mobile device or computer (* optional accessory).
Graphics 4.5 SMART control panel
Touch control and change of parameters:
- Summer / winter mode
- Cleaning timer
- Operational information
- Temperature setting
- Circuits control
- Mixing ciruits settings
- Wide range of additional settings
- Internet module and application for WiFi or LAN control (optional accessory)
Pellet boiler and realiable material quality
Pellet 30 Automatic Plus has won many awards at home and abroad. We have used our many years of experience in the production and used modern technologies and the highest quality materials. The long service life of the boiler is guaranteed by boiler steel with a thickness of 6 mm.
Exchanger with turbulators
Ecological combustion with a minimum of ash
Pellet 30 Automatic plus has a minimal impact on the environment. It uses pellets as a renewable fuel source. Pellets offer a high calorific value and are an environmentally friendly fuel, their combustion produces only a minimum of ash – approximately 1% of the fuel consumed. The advantage of pellets is also extreme density and very low water content.
Pellet boiler comfort and higher efficiency
To achieve higher boiler output we recommend purchasing an accumulation tank and ATTACK Oventrop mixing equipment. For regular service it is very important to buy the boiler in the country you live in.
Accessories of boiler
The pellet boiler also includes a 500 l pellet tank. Alternatively, the use of an external textile pellet tray – big-bag. A large pellet tank shall ensure burning in the boiler for a sufficient period of time.
